Best car amplifier for mids and highs in 2023

Power - 250 Max x 4 @2-Ohms, 125 Max x 4 @4-Ohms, 500 Max x 2 Bridged @4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)

Fixed High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. The High-Pass Crossover gears specifically towards “highs” such as all size speakers including mid ranges and tweeters

Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

Specs - Dimensions: 10.72” x 10.44” x 2.25”, Weight: 5.80 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 2 25 Amp ATO Blade

Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Power - 400 Max x 2 @ 2 Ohms, 200 Max x 2 @ 4 Ohms, 800 Max Bridged x 1 @ 4 Ohms

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers

Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

Specs - Dimensions: 10.72” x 10.44” x 2.25”, Weight: 5.20 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 40 Amp ATO Blade

Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality

Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers

Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Specs - Dimensions: 9.13” x 10.44” x 2.25”, Weight: 4.43 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 30 Amp ATO Blade

POWER: 1600 Watts Max x 1 @2-Ohms, 800 Watts Max x 1 @4-Ohms

CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

VARIABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

DIMENSIONS: The R1600M is 12.3 inches in Depth, 10.4 inches in Width and 2.25 inches in Height. It weighs 6.4 lbs.

WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality

DS 800X4 1 Ohm: For STEREO connections, the minimum impedance is 1 ohm at each channel and for BRIGDE connections is 2 ohms

Positive / negative power supply cable: 7 AWG

Protection fuse or circuit breaker: 60A

Frequency Response (Full Range): 10Hz - 22KHz (-3dB)

HPF (High Pass Filter): 90Hz (-12dB/8ª) Fixed

LPF (Low Pass Filter): 90Hz (-12dB/8ª) Fixed

750 watt maximum power full-range amplifier

Amplifier Class: AB

No. of channel: 2/1 Channel

Max. Output Power: 750W x 2

1500W Maximum Power Full-Range Amplifier

Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road

This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system

Brand new and reliable quality 4 Channel Car Amplifier

Can connect to 4 speakers,6 phase high frequency intermediate frequency low frequency regulation

Double low frequency output,can be push any size Subwoofer within 160W rated power

This 4 channel amp is also equipped with fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions.

2 Ohm Stable Operation & Soft Turn On Circuit

Thermal and Speaker Short Protection Circuitry

Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation

Remote Turn-On / Turn-Off Circuit

LED Power and Protection Indicators